盲拍(基于区块链的匿名拍卖实现)

2022-05-10 17:13 更新

盲拍

在本节中,我们将展示在以太坊上创建一个完全盲目的拍卖合约是多么容易。我们将从公开拍卖开始,每个人都可以看到出价,然后将此合同扩展到盲拍,直到投标期结束才能看到实际出价。

简单公开竞价

以下简单拍卖合约的总体思路是,每个人都可以在一个投标期间发送他们的投标。出价已经包括汇款/以太币,以便将投标人绑定到他们的出价。如果提出最高出价,则先前的最高出价者将收回他们的钱。投标期结束后,必须手动调用合同让受益人收到他们的钱——合同无法自行激活。

// SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.8.4;
contract SimpleAuction {
    // Parameters of the auction. Times are either
    // absolute unix timestamps (seconds since 1970-01-01)
    // or time periods in seconds.
    address payable public beneficiary;
    uint public auctionEndTime;

    // Current state of the auction.
    address public highestBidder;
    uint public highestBid;

    // Allowed withdrawals of previous bids
    mapping(address => uint) pendingReturns;

    // Set to true at the end, disallows any change.
    // By default initialized to `false`.
    bool ended;

    // Events that will be emitted on changes.
    event HighestBidIncreased(address bidder, uint amount);
    event AuctionEnded(address winner, uint amount);

    // Errors that describe failures.

    // The triple-slash comments are so-called natspec
    // comments. They will be shown when the user
    // is asked to confirm a transaction or
    // when an error is displayed.

    /// The auction has already ended.
    error AuctionAlreadyEnded();
    /// There is already a higher or equal bid.
    error BidNotHighEnough(uint highestBid);
    /// The auction has not ended yet.
    error AuctionNotYetEnded();
    /// The function auctionEnd has already been called.
    error AuctionEndAlreadyCalled();

    /// Create a simple auction with `biddingTime`
    /// seconds bidding time on behalf of the
    /// beneficiary address `beneficiaryAddress`.
    constructor(
        uint biddingTime,
        address payable beneficiaryAddress
    ) {
        beneficiary = beneficiaryAddress;
        auctionEndTime = block.timestamp + biddingTime;
    }

    /// Bid on the auction with the value sent
    /// together with this transaction.
    /// The value will only be refunded if the
    /// auction is not won.
    function bid() external payable {
        // No arguments are necessary, all
        // information is already part of
        // the transaction. The keyword payable
        // is required for the function to
        // be able to receive Ether.

        // Revert the call if the bidding
        // period is over.
        if (block.timestamp > auctionEndTime)
            revert AuctionAlreadyEnded();

        // If the bid is not higher, send the
        // money back (the revert statement
        // will revert all changes in this
        // function execution including
        // it having received the money).
        if (msg.value <= highestBid)
            revert BidNotHighEnough(highestBid);

        if (highestBid != 0) {
            // Sending back the money by simply using
            // highestBidder.send(highestBid) is a security risk
            // because it could execute an untrusted contract.
            // It is always safer to let the recipients
            // withdraw their money themselves.
            pendingReturns[highestBidder] += highestBid;
        }
        highestBidder = msg.sender;
        highestBid = msg.value;
        emit HighestBidIncreased(msg.sender, msg.value);
    }

    /// Withdraw a bid that was overbid.
    function withdraw() external returns (bool) {
        uint amount = pendingReturns[msg.sender];
        if (amount > 0) {
            // It is important to set this to zero because the recipient
            // can call this function again as part of the receiving call
            // before `send` returns.
            pendingReturns[msg.sender] = 0;

            // msg.sender is not of type `address payable` and must be
            // explicitly converted using `payable(msg.sender)` in order
            // use the member function `send()`.
            if (!payable(msg.sender).send(amount)) {
                // No need to call throw here, just reset the amount owing
                pendingReturns[msg.sender] = amount;
                return false;
            }
        }
        return true;
    }

    /// End the auction and send the highest bid
    /// to the beneficiary.
    function auctionEnd() external {
        // It is a good guideline to structure functions that interact
        // with other contracts (i.e. they call functions or send Ether)
        // into three phases:
        // 1. checking conditions
        // 2. performing actions (potentially changing conditions)
        // 3. interacting with other contracts
        // If these phases are mixed up, the other contract could call
        // back into the current contract and modify the state or cause
        // effects (ether payout) to be performed multiple times.
        // If functions called internally include interaction with external
        // contracts, they also have to be considered interaction with
        // external contracts.

        // 1. Conditions
        if (block.timestamp < auctionEndTime)
            revert AuctionNotYetEnded();
        if (ended)
            revert AuctionEndAlreadyCalled();

        // 2. Effects
        ended = true;
        emit AuctionEnded(highestBidder, highestBid);

        // 3. Interaction
        beneficiary.transfer(highestBid);
    }
}

盲拍

下面将之前的公开拍卖扩展到盲拍。盲拍的优点是在投标期结束时没有时间压力。在透明的计算平台上创建盲目拍卖可能听起来很矛盾,但密码学可以解决这个问题。

投标期间,投标人实际上并没有发送他们的投标,而只是一个经过哈希处理的版本。由于目前认为实际上不可能找到两个(足够长的)哈希值相等的值,因此投标人承诺以此投标。投标期结束后,投标人必须公开他们的投标:他们发送未加密的值,并且合约检查哈希值是否与投标期间提供的值相同。

另一个挑战是如何同时使拍卖具有约束力和盲目性:防止投标人在赢得拍卖后不发送资金的唯一方法是让他们与投标一起发送。由于以太坊中的价值转移不能被蒙蔽,任何人都可以看到价值。

下面的合约通过接受任何大于最高出价的值来解决这个问题。由于这当然只能在显示阶段进行检查,因此某些出价可能是无效的,这是故意的(它甚至提供了一个明确的标志来放置具有高价值转移的无效出价):投标人可以通过放置几个高或低无效出价。

// SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.8.4;
contract BlindAuction {
    struct Bid {
        bytes32 blindedBid;
        uint deposit;
    }

    address payable public beneficiary;
    uint public biddingEnd;
    uint public revealEnd;
    bool public ended;

    mapping(address => Bid[]) public bids;

    address public highestBidder;
    uint public highestBid;

    // Allowed withdrawals of previous bids
    mapping(address => uint) pendingReturns;

    event AuctionEnded(address winner, uint highestBid);

    // Errors that describe failures.

    /// The function has been called too early.
    /// Try again at `time`.
    error TooEarly(uint time);
    /// The function has been called too late.
    /// It cannot be called after `time`.
    error TooLate(uint time);
    /// The function auctionEnd has already been called.
    error AuctionEndAlreadyCalled();

    // Modifiers are a convenient way to validate inputs to
    // functions. `onlyBefore` is applied to `bid` below:
    // The new function body is the modifier's body where
    // `_` is replaced by the old function body.
    modifier onlyBefore(uint time) {
        if (block.timestamp >= time) revert TooLate(time);
        _;
    }
    modifier onlyAfter(uint time) {
        if (block.timestamp <= time) revert TooEarly(time);
        _;
    }

    constructor(
        uint biddingTime,
        uint revealTime,
        address payable beneficiaryAddress
    ) {
        beneficiary = beneficiaryAddress;
        biddingEnd = block.timestamp + biddingTime;
        revealEnd = biddingEnd + revealTime;
    }

    /// Place a blinded bid with `blindedBid` =
    /// keccak256(abi.encodePacked(value, fake, secret)).
    /// The sent ether is only refunded if the bid is correctly
    /// revealed in the revealing phase. The bid is valid if the
    /// ether sent together with the bid is at least "value" and
    /// "fake" is not true. Setting "fake" to true and sending
    /// not the exact amount are ways to hide the real bid but
    /// still make the required deposit. The same address can
    /// place multiple bids.
    function bid(bytes32 blindedBid)
        external
        payable
        onlyBefore(biddingEnd)
    {
        bids[msg.sender].push(Bid({
            blindedBid: blindedBid,
            deposit: msg.value
        }));
    }

    /// Reveal your blinded bids. You will get a refund for all
    /// correctly blinded invalid bids and for all bids except for
    /// the totally highest.
    function reveal(
        uint[] calldata values,
        bool[] calldata fakes,
        bytes32[] calldata secrets
    )
        external
        onlyAfter(biddingEnd)
        onlyBefore(revealEnd)
    {
        uint length = bids[msg.sender].length;
        require(values.length == length);
        require(fakes.length == length);
        require(secrets.length == length);

        uint refund;
        for (uint i = 0; i < length; i++) {
            Bid storage bidToCheck = bids[msg.sender][i];
            (uint value, bool fake, bytes32 secret) =
                    (values[i], fakes[i], secrets[i]);
            if (bidToCheck.blindedBid != keccak256(abi.encodePacked(value, fake, secret))) {
                // Bid was not actually revealed.
                // Do not refund deposit.
                continue;
            }
            refund += bidToCheck.deposit;
            if (!fake && bidToCheck.deposit >= value) {
                if (placeBid(msg.sender, value))
                    refund -= value;
            }
            // Make it impossible for the sender to re-claim
            // the same deposit.
            bidToCheck.blindedBid = bytes32(0);
        }
        payable(msg.sender).transfer(refund);
    }

    /// Withdraw a bid that was overbid.
    function withdraw() external {
        uint amount = pendingReturns[msg.sender];
        if (amount > 0) {
            // It is important to set this to zero because the recipient
            // can call this function again as part of the receiving call
            // before `transfer` returns (see the remark above about
            // conditions -> effects -> interaction).
            pendingReturns[msg.sender] = 0;

            payable(msg.sender).transfer(amount);
        }
    }

    /// End the auction and send the highest bid
    /// to the beneficiary.
    function auctionEnd()
        external
        onlyAfter(revealEnd)
    {
        if (ended) revert AuctionEndAlreadyCalled();
        emit AuctionEnded(highestBidder, highestBid);
        ended = true;
        beneficiary.transfer(highestBid);
    }

    // This is an "internal" function which means that it
    // can only be called from the contract itself (or from
    // derived contracts).
    function placeBid(address bidder, uint value) internal
            returns (bool success)
    {
        if (value <= highestBid) {
            return false;
        }
        if (highestBidder != address(0)) {
            // Refund the previously highest bidder.
            pendingReturns[highestBidder] += highestBid;
        }
        highestBid = value;
        highestBidder = bidder;
        return true;
    }
}
以上内容是否对您有帮助:
在线笔记
App下载
App下载

扫描二维码

下载编程狮App

公众号
微信公众号

编程狮公众号