Neural Network
Neural Network
Note: Functions takingTensor
arguments can also take anything accepted bytf.convert_to_tensor
.
Activation Functions
The activation ops provide different types of nonlinearities for use in neural networks. These include smooth nonlinearities (sigmoid
, tanh
, elu
, softplus
, and softsign
), continuous but not everywhere differentiable functions (relu
, relu6
, crelu
and relu_x
), and random regularization (dropout
).
All activation ops apply componentwise, and produce a tensor of the same shape as the input tensor.
tf.nn.relu
tf.nn.relu6
tf.nn.crelu
tf.nn.elu
tf.nn.softplus
tf.nn.softsign
tf.nn.dropout
tf.nn.bias_add
tf.sigmoid
tf.tanh
Convolution
The convolution ops sweep a 2-D filter over a batch of images, applying the filter to each window of each image of the appropriate size. The different ops trade off between generic vs. specific filters:
-
conv2d
: Arbitrary filters that can mix channels together. -
depthwise_conv2d
: Filters that operate on each channel independently. -
separable_conv2d
: A depthwise spatial filter followed by a pointwise filter.
Note that although these ops are called "convolution", they are strictly speaking "cross-correlation" since the filter is combined with an input window without reversing the filter. For details, see the properties of cross-correlation.
The filter is applied to image patches of the same size as the filter and strided according to the strides
argument. strides = [1, 1, 1, 1]
applies the filter to a patch at every offset, strides = [1, 2, 2, 1]
applies the filter to every other image patch in each dimension, etc.
Ignoring channels for the moment, and assume that the 4-D input
has shape [batch, in_height, in_width, ...]
and the 4-D filter
has shape [filter_height, filter_width, ...]
, then the spatial semantics of the convolution ops are as follows: first, according to the padding scheme chosen as 'SAME'
or 'VALID'
, the output size and the padding pixels are computed. For the 'SAME'
padding, the output height and width are computed as:
out_height = ceil(float(in_height) / float(strides[1])) out_width = ceil(float(in_width) / float(strides[2]))
and the padding on the top and left are computed as:
pad_along_height = max((out_height - 1) * strides[1] + filter_height - in_height, 0) pad_along_width = max((out_width - 1) * strides[2] + filter_width - in_width, 0) pad_top = pad_along_height // 2 pad_bottom = pad_along_height - pad_top pad_left = pad_along_width // 2 pad_right = pad_along_width - pad_left
Note that the division by 2 means that there might be cases when the padding on both sides (top vs bottom, right vs left) are off by one. In this case, the bottom and right sides always get the one additional padded pixel. For example, when pad_along_height
is 5, we pad 2 pixels at the top and 3 pixels at the bottom. Note that this is different from existing libraries such as cuDNN and Caffe, which explicitly specify the number of padded pixels and always pad the same number of pixels on both sides.
For the 'VALID
' padding, the output height and width are computed as:
out_height = ceil(float(in_height - filter_height + 1) / float(strides[1])) out_width = ceil(float(in_width - filter_width + 1) / float(strides[2]))
and the padding values are always zero. The output is then computed as
output[b, i, j, :] = sum_{di, dj} input[b, strides[1] * i + di - pad_top, strides[2] * j + dj - pad_left, ...] * filter[di, dj, ...]
where any value outside the original input image region are considered zero ( i.e. we pad zero values around the border of the image).
Since input
is 4-D, each input[b, i, j, :]
is a vector. For conv2d
, these vectors are multiplied by the filter[di, dj, :, :]
matrices to produce new vectors. For depthwise_conv_2d
, each scalar component input[b, i, j, k]
is multiplied by a vector filter[di, dj, k]
, and all the vectors are concatenated.
tf.nn.convolution
tf.nn.conv2d
tf.nn.depthwise_conv2d
tf.nn.depthwise_conv2d_native
tf.nn.separable_conv2d
tf.nn.atrous_conv2d
tf.nn.atrous_conv2d_transpose
tf.nn.conv2d_transpose
tf.nn.conv1d
tf.nn.conv3d
tf.nn.conv3d_transpose
tf.nn.conv2d_backprop_filter
tf.nn.conv2d_backprop_input
tf.nn.conv3d_backprop_filter_v2
tf.nn.depthwise_conv2d_native_backprop_filter
tf.nn.depthwise_conv2d_native_backprop_input
Pooling
The pooling ops sweep a rectangular window over the input tensor, computing a reduction operation for each window (average, max, or max with argmax). Each pooling op uses rectangular windows of size ksize
separated by offset strides
. For example, if strides
is all ones every window is used, if strides
is all twos every other window is used in each dimension, etc.
In detail, the output is
output[i] = reduce(value[strides * i:strides * i + ksize])
where the indices also take into consideration the padding values. Please refer to the Convolution
section for details about the padding calculation.
tf.nn.avg_pool
tf.nn.max_pool
tf.nn.max_pool_with_argmax
tf.nn.avg_pool3d
tf.nn.max_pool3d
tf.nn.fractional_avg_pool
tf.nn.fractional_max_pool
tf.nn.pool
Morphological filtering
Morphological operators are non-linear filters used in image processing.
Greyscale morphological dilation is the max-sum counterpart of standard sum-product convolution:
output[b, y, x, c] = max_{dy, dx} input[b, strides[1] * y + rates[1] * dy, strides[2] * x + rates[2] * dx, c] + filter[dy, dx, c]
The filter
is usually called structuring function. Max-pooling is a special case of greyscale morphological dilation when the filter assumes all-zero values (a.k.a. flat structuring function).
Greyscale morphological erosion is the min-sum counterpart of standard sum-product convolution:
output[b, y, x, c] = min_{dy, dx} input[b, strides[1] * y - rates[1] * dy, strides[2] * x - rates[2] * dx, c] - filter[dy, dx, c]
Dilation and erosion are dual to each other. The dilation of the input signal f
by the structuring signal g
is equal to the negation of the erosion of -f
by the reflected g
, and vice versa.
Striding and padding is carried out in exactly the same way as in standard convolution. Please refer to the Convolution
section for details.
Normalization
Normalization is useful to prevent neurons from saturating when inputs may have varying scale, and to aid generalization.
tf.nn.l2_normalize
tf.nn.local_response_normalization
tf.nn.sufficient_statistics
tf.nn.normalize_moments
tf.nn.moments
tf.nn.weighted_moments
tf.nn.fused_batch_norm
tf.nn.batch_normalization
tf.nn.batch_norm_with_global_normalization
Losses
The loss ops measure error between two tensors, or between a tensor and zero. These can be used for measuring accuracy of a network in a regression task or for regularization purposes (weight decay).
Classification
TensorFlow provides several operations that help you perform classification.
tf.nn.sigmoid_cross_entropy_with_logits
tf.nn.softmax
tf.nn.log_softmax
tf.nn.softmax_cross_entropy_with_logits
tf.nn.sparse_softmax_cross_entropy_with_logits
tf.nn.weighted_cross_entropy_with_logits
Embeddings
TensorFlow provides library support for looking up values in embedding tensors.
Recurrent Neural Networks
TensorFlow provides a number of methods for constructing Recurrent Neural Networks. Most accept an RNNCell
-subclassed object (see the documentation for tf.contrib.rnn
).
Connectionist Temporal Classification (CTC)
Evaluation
The evaluation ops are useful for measuring the performance of a network. They are typically used at evaluation time.
Candidate Sampling
Do you want to train a multiclass or multilabel model with thousands or millions of output classes (for example, a language model with a large vocabulary)? Training with a full Softmax is slow in this case, since all of the classes are evaluated for every training example. Candidate Sampling training algorithms can speed up your step times by only considering a small randomly-chosen subset of contrastive classes (called candidates) for each batch of training examples.
See our Candidate Sampling Algorithms Reference
Sampled Loss Functions
TensorFlow provides the following sampled loss functions for faster training.
Candidate Samplers
TensorFlow provides the following samplers for randomly sampling candidate classes when using one of the sampled loss functions above.
tf.nn.uniform_candidate_sampler
tf.nn.log_uniform_candidate_sampler
tf.nn.learned_unigram_candidate_sampler
tf.nn.fixed_unigram_candidate_sampler
Miscellaneous candidate sampling utilities
Quantization ops
© 2017 The TensorFlow Authors. All rights reserved.
Licensed under the Creative Commons Attribution License 3.0.
Code samples licensed under the Apache 2.0 License.
https://www.tensorflow.org/api_guides/python/nn