std::usize

Primitive Type usize

The pointer-sized unsigned integer type.

See also the std::usize module.

However, please note that examples are shared between primitive integer types. So it's normal if you see usage of types like isize in there.

Methods

`impl usize` [src]

`const fn min_value() -> usize`

Returns the smallest value that can be represented by this integer type.

Examples

assert_eq!(u8::min_value(), 0);

`const fn max_value() -> usize`

Returns the largest value that can be represented by this integer type.

Examples

assert_eq!(u8::max_value(), 255);

`fn from_str_radix(src: &str, radix: u32) -> Result<usize, ParseIntError>`

Converts a string slice in a given base to an integer.

Leading and trailing whitespace represent an error.

Examples

Basic usage:

assert_eq!(u32::from_str_radix("A", 16), Ok(10));

`fn count_ones(self) -> u32`

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

let n = 0b01001100u8;

assert_eq!(n.count_ones(), 3);

`fn count_zeros(self) -> u32`

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

let n = 0b01001100u8;

assert_eq!(n.count_zeros(), 5);

`fn leading_zeros(self) -> u32`

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

let n = 0b0101000u16;

assert_eq!(n.leading_zeros(), 10);

`fn trailing_zeros(self) -> u32`

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

let n = 0b0101000u16;

assert_eq!(n.trailing_zeros(), 3);

`fn rotate_left(self, n: u32) -> usize`

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as <<!

Examples

Basic usage:

let n = 0x0123456789ABCDEFu64;
let m = 0x3456789ABCDEF012u64;

assert_eq!(n.rotate_left(12), m);

`fn rotate_right(self, n: u32) -> usize`

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as >>!

Examples

Basic usage:

let n = 0x0123456789ABCDEFu64;
let m = 0xDEF0123456789ABCu64;

assert_eq!(n.rotate_right(12), m);

`fn swap_bytes(self) -> usize`

Reverses the byte order of the integer.

Examples

Basic usage:

let n = 0x0123456789ABCDEFu64;
let m = 0xEFCDAB8967452301u64;

assert_eq!(n.swap_bytes(), m);

`fn from_be(x: usize) -> usize`

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

let n = 0x0123456789ABCDEFu64;

if cfg!(target_endian = "big") {
    assert_eq!(u64::from_be(n), n)
} else {
    assert_eq!(u64::from_be(n), n.swap_bytes())
}

`fn from_le(x: usize) -> usize`

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

let n = 0x0123456789ABCDEFu64;

if cfg!(target_endian = "little") {
    assert_eq!(u64::from_le(n), n)
} else {
    assert_eq!(u64::from_le(n), n.swap_bytes())
}

`fn to_be(self) -> usize`

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

let n = 0x0123456789ABCDEFu64;

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

`fn to_le(self) -> usize`

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

let n = 0x0123456789ABCDEFu64;

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

`fn checked_add(self, other: usize) -> Option<usize>`

Checked integer addition. Computes self + other, returning None if overflow occurred.

Examples

Basic usage:

assert_eq!(5u16.checked_add(65530), Some(65535));
assert_eq!(6u16.checked_add(65530), None);

`fn checked_sub(self, other: usize) -> Option<usize>`

Checked integer subtraction. Computes self - other, returning None if underflow occurred.

Examples

Basic usage:

assert_eq!(1u8.checked_sub(1), Some(0));
assert_eq!(0u8.checked_sub(1), None);

`fn checked_mul(self, other: usize) -> Option<usize>`

Checked integer multiplication. Computes self * other, returning None if underflow or overflow occurred.

Examples

Basic usage:

assert_eq!(5u8.checked_mul(51), Some(255));
assert_eq!(5u8.checked_mul(52), None);

`fn checked_div(self, other: usize) -> Option<usize>`

Checked integer division. Computes self / other, returning None if other == 0 or the operation results in underflow or overflow.

Examples

Basic usage:

assert_eq!(128u8.checked_div(2), Some(64));
assert_eq!(1u8.checked_div(0), None);

`fn checked_rem(self, other: usize) -> Option<usize>`
1.7.0

Checked integer remainder. Computes self % other, returning None if other == 0 or the operation results in underflow or overflow.

Examples

Basic usage:

assert_eq!(5u32.checked_rem(2), Some(1));
assert_eq!(5u32.checked_rem(0), None);

`fn checked_neg(self) -> Option<usize>`
1.7.0

Checked negation. Computes -self, returning None unless self == 0.

Note that negating any positive integer will overflow.

Examples

Basic usage:

assert_eq!(0u32.checked_neg(), Some(0));
assert_eq!(1u32.checked_neg(), None);

`fn checked_shl(self, rhs: u32) -> Option<usize>`
1.7.0

Checked shift left. Computes self << rhs, returning None if rhs is larger than or equal to the number of bits in self.

Examples

Basic usage:

assert_eq!(0x10u32.checked_shl(4), Some(0x100));
assert_eq!(0x10u32.checked_shl(33), None);

`fn checked_shr(self, rhs: u32) -> Option<usize>`
1.7.0

Checked shift right. Computes self >> rhs, returning None if rhs is larger than or equal to the number of bits in self.

Examples

Basic usage:

assert_eq!(0x10u32.checked_shr(4), Some(0x1));
assert_eq!(0x10u32.checked_shr(33), None);

`fn saturating_add(self, other: usize) -> usize`

Saturating integer addition. Computes self + other, saturating at the numeric bounds instead of overflowing.

Examples

Basic usage:

assert_eq!(100u8.saturating_add(1), 101);
assert_eq!(200u8.saturating_add(127), 255);

`fn saturating_sub(self, other: usize) -> usize`

Saturating integer subtraction. Computes self - other, saturating at the numeric bounds instead of overflowing.

Examples

Basic usage:

assert_eq!(100u8.saturating_sub(27), 73);
assert_eq!(13u8.saturating_sub(127), 0);

`fn saturating_mul(self, other: usize) -> usize`
1.7.0

Saturating integer multiplication. Computes self * other, saturating at the numeric bounds instead of overflowing.

Examples

Basic usage:

use std::u32;

assert_eq!(100u32.saturating_mul(127), 12700);
assert_eq!((1u32 << 23).saturating_mul(1 << 23), u32::MAX);

`fn wrapping_add(self, rhs: usize) -> usize`

Wrapping (modular) addition. Computes self + other, wrapping around at the boundary of the type.

Examples

Basic usage:

assert_eq!(200u8.wrapping_add(55), 255);
assert_eq!(200u8.wrapping_add(155), 99);

`fn wrapping_sub(self, rhs: usize) -> usize`

Wrapping (modular) subtraction. Computes self - other, wrapping around at the boundary of the type.

Examples

Basic usage:

assert_eq!(100u8.wrapping_sub(100), 0);
assert_eq!(100u8.wrapping_sub(155), 201);

`fn wrapping_mul(self, rhs: usize) -> usize`

Wrapping (modular) multiplication. Computes self * other, wrapping around at the boundary of the type.

Examples

Basic usage:

assert_eq!(10u8.wrapping_mul(12), 120);
assert_eq!(25u8.wrapping_mul(12), 44);

`fn wrapping_div(self, rhs: usize) -> usize`
1.2.0

Wrapping (modular) division. Computes self / other. Wrapped division on unsigned types is just normal division. There's no way wrapping could ever happen. This function exists, so that all operations are accounted for in the wrapping operations.

Examples

Basic usage:

assert_eq!(100u8.wrapping_div(10), 10);

`fn wrapping_rem(self, rhs: usize) -> usize`
1.2.0

Wrapping (modular) remainder. Computes self % other. Wrapped remainder calculation on unsigned types is just the regular remainder calculation. There's no way wrapping could ever happen. This function exists, so that all operations are accounted for in the wrapping operations.

Examples

Basic usage:

assert_eq!(100u8.wrapping_rem(10), 0);

`fn wrapping_neg(self) -> usize`
1.2.0

Wrapping (modular) negation. Computes -self, wrapping around at the boundary of the type.

Since unsigned types do not have negative equivalents all applications of this function will wrap (except for -0). For values smaller than the corresponding signed type's maximum the result is the same as casting the corresponding signed value. Any larger values are equivalent to MAX + 1 - (val - MAX - 1) where MAX is the corresponding signed type's maximum.

Examples

Basic usage:

assert_eq!(100u8.wrapping_neg(), 156);
assert_eq!(0u8.wrapping_neg(), 0);
assert_eq!(180u8.wrapping_neg(), 76);
assert_eq!(180u8.wrapping_neg(), (127 + 1) - (180u8 - (127 + 1)));

`fn wrapping_shl(self, rhs: u32) -> usize`
1.2.0

Panic-free bitwise shift-left; yields self << mask(rhs), where mask removes any high-order bits of rhs that would cause the shift to exceed the bitwidth of the type.

Note that this is not the same as a rotate-left; the RHS of a wrapping shift-left is restricted to the range of the type, rather than the bits shifted out of the LHS being returned to the other end. The primitive integer types all implement a rotate_left function, which may be what you want instead.

Examples

Basic usage:

assert_eq!(1u8.wrapping_shl(7), 128);
assert_eq!(1u8.wrapping_shl(8), 1);

`fn wrapping_shr(self, rhs: u32) -> usize`
1.2.0

Panic-free bitwise shift-right; yields self >> mask(rhs), where mask removes any high-order bits of rhs that would cause the shift to exceed the bitwidth of the type.

Note that this is not the same as a rotate-right; the RHS of a wrapping shift-right is restricted to the range of the type, rather than the bits shifted out of the LHS being returned to the other end. The primitive integer types all implement a rotate_right function, which may be what you want instead.

Examples

Basic usage:

assert_eq!(128u8.wrapping_shr(7), 1);
assert_eq!(128u8.wrapping_shr(8), 128);

`fn overflowing_add(self, rhs: usize) -> (usize, bool)`
1.7.0

Calculates self + rhs

Returns a tuple of the addition along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would have occurred then the wrapped value is returned.

Examples

Basic usage

use std::u32;

assert_eq!(5u32.overflowing_add(2), (7, false));
assert_eq!(u32::MAX.overflowing_add(1), (0, true));

`fn overflowing_sub(self, rhs: usize) -> (usize, bool)`
1.7.0

Calculates self - rhs

Returns a tuple of the subtraction along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would have occurred then the wrapped value is returned.

Examples

Basic usage

use std::u32;

assert_eq!(5u32.overflowing_sub(2), (3, false));
assert_eq!(0u32.overflowing_sub(1), (u32::MAX, true));

`fn overflowing_mul(self, rhs: usize) -> (usize, bool)`
1.7.0

Calculates the multiplication of self and rhs.

Returns a tuple of the multiplication along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would have occurred then the wrapped value is returned.

Examples

Basic usage

assert_eq!(5u32.overflowing_mul(2), (10, false));
assert_eq!(1_000_000_000u32.overflowing_mul(10), (1410065408, true));

`fn overflowing_div(self, rhs: usize) -> (usize, bool)`
1.7.0

Calculates the divisor when self is divided by rhs.

Returns a tuple of the divisor along with a boolean indicating whether an arithmetic overflow would occur. Note that for unsigned integers overflow never occurs, so the second value is always false.

Panics

This function will panic if rhs is 0.

Examples

Basic usage

assert_eq!(5u32.overflowing_div(2), (2, false));

`fn overflowing_rem(self, rhs: usize) -> (usize, bool)`
1.7.0

Calculates the remainder when self is divided by rhs.

Returns a tuple of the remainder after dividing along with a boolean indicating whether an arithmetic overflow would occur. Note that for unsigned integers overflow never occurs, so the second value is always false.

Panics

This function will panic if rhs is 0.

Examples

Basic usage

assert_eq!(5u32.overflowing_rem(2), (1, false));

`fn overflowing_neg(self) -> (usize, bool)`
1.7.0

Negates self in an overflowing fashion.

Returns !self + 1 using wrapping operations to return the value that represents the negation of this unsigned value. Note that for positive unsigned values overflow always occurs, but negating 0 does not overflow.

Examples

Basic usage

assert_eq!(0u32.overflowing_neg(), (0, false));
assert_eq!(2u32.overflowing_neg(), (-2i32 as u32, true));

`fn overflowing_shl(self, rhs: u32) -> (usize, bool)`
1.7.0

Shifts self left by rhs bits.

Returns a tuple of the shifted version of self along with a boolean indicating whether the shift value was larger than or equal to the number of bits. If the shift value is too large, then value is masked (N-1) where N is the number of bits, and this value is then used to perform the shift.

Examples

Basic usage

assert_eq!(0x10u32.overflowing_shl(4), (0x100, false));
assert_eq!(0x10u32.overflowing_shl(36), (0x100, true));

`fn overflowing_shr(self, rhs: u32) -> (usize, bool)`
1.7.0

Shifts self right by rhs bits.

Examples

Basic usage

assert_eq!(0x10u32.overflowing_shr(4), (0x1, false));
assert_eq!(0x10u32.overflowing_shr(36), (0x1, true));

`fn pow(self, exp: u32) -> usize`

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

assert_eq!(2u32.pow(4), 16);

`fn is_power_of_two(self) -> bool`

Returns true if and only if self == 2^k for some k.

Examples

Basic usage:

assert!(16u8.is_power_of_two());
assert!(!10u8.is_power_of_two());

`fn next_power_of_two(self) -> usize`

Returns the smallest power of two greater than or equal to self. Unspecified behavior on overflow.

Examples

Basic usage:

assert_eq!(2u8.next_power_of_two(), 2);
assert_eq!(3u8.next_power_of_two(), 4);

`fn checked_next_power_of_two(self) -> Option<usize>`

Returns the smallest power of two greater than or equal to n. If the next power of two is greater than the type's maximum value, None is returned, otherwise the power of two is wrapped in Some.

Examples

Basic usage:

assert_eq!(2u8.checked_next_power_of_two(), Some(2));
assert_eq!(3u8.checked_next_power_of_two(), Some(4));
assert_eq!(200u8.checked_next_power_of_two(), None);

Trait Implementations

`impl Eq for usize` [src]

`impl Add<usize> for usize` [src]

`type Output = usize`

The resulting type after applying the + operator

`fn add(self, other: usize) -> usize`

The method for the + operator

`impl<'a> Add<usize> for &'a usize` [src]

`type Output = <usize as Add<usize>>::Output`

The resulting type after applying the + operator

`fn add(self, other: usize) -> <usize as Add<usize>>::Output`

The method for the + operator

`impl<'a> Add<&'a usize> for usize` [src]

`type Output = <usize as Add<usize>>::Output`

The resulting type after applying the + operator

`fn add(self, other: &'a usize) -> <usize as Add<usize>>::Output`

The method for the + operator

`impl<'a, 'b> Add<&'a usize> for &'b usize` [src]

`type Output = <usize as Add<usize>>::Output`

The resulting type after applying the + operator

`fn add(self, other: &'a usize) -> <usize as Add<usize>>::Output`

The method for the + operator