3.17.15. H8/300 Options

3.17.15 H8/300 Options

These ‘-m’ options are defined for the H8/300 implementations:

-mrelax
Shorten some address references at link time, when possible; uses the linker option -relax. See ld and the H8/300, for a fuller description.
-mh
Generate code for the H8/300H.
-ms
Generate code for the H8S.
-mn
Generate code for the H8S and H8/300H in the normal mode. This switch must be used either with -mh or -ms.
-ms2600
Generate code for the H8S/2600. This switch must be used with -ms.
-mexr
Extended registers are stored on stack before execution of function with monitor attribute. Default option is -mexr. This option is valid only for H8S targets.
-mno-exr
Extended registers are not stored on stack before execution of function with monitor attribute. Default option is -mno-exr. This option is valid only for H8S targets.
-mint32
Make int data 32 bits by default.
-malign-300
On the H8/300H and H8S, use the same alignment rules as for the H8/300. The default for the H8/300H and H8S is to align longs and floats on 4-byte boundaries. -malign-300 causes them to be aligned on 2-byte boundaries. This option has no effect on the H8/300.

© Free Software Foundation
Licensed under the GNU Free Documentation License, Version 1.3.
https://gcc.gnu.org/onlinedocs/gcc-5.4.0/gcc/H8_002f300-Options.html

在线笔记
App下载
App下载

扫描二维码

下载编程狮App

公众号
微信公众号

编程狮公众号

意见反馈
返回顶部