offset-path

offset-path

This is an experimental technology
Because this technology's specification has not stabilized, check the compatibility table for usage in various browsers. Also note that the syntax and behavior of an experimental technology is subject to change in future versions of browsers as the specification changes.

The offset-path CSS property specifies the offset path where the element gets positioned. The exact element’s position on the offset path is determined by the offset-distance property. An offset path is either a specified path with one or multiple sub-paths or the geometry of a not-styled basic shape. Each shape or path must define an initial position for the computed value of "0" for offset-distance and an initial direction which specifies the rotation of the object to the initial position.

In this specification, a direction (or rotation) of 0 degrees is equivalent to the direction of the positive x-axis in the object’s local coordinate system. In other words, a rotation of 0 degree points to the right side of the UA if the object and its ancestors have no transformation applied.

Early versions of the spec called this property motion-path.

Initial value none
Applies to transformable elements
Inherited no
Media visual
Computed value as specified
Animation type as <angle>, <basic-shape> or <path()>
Canonical order per grammar
Creates stacking context yes

Syntax

TBD

Formal syntax

none | ray( [ <angle> && <size>? && contain? ] ) | <path()> | <url> | [ <basic-shape> || <geometry-box> ]

where
<size> = closest-side | farthest-side | closest-corner | farthest-corner | <length> | <length-percentage>{2}
<basic-shape> = <inset()> | <circle()> | <ellipse()> | <polygon()>
<geometry-box> = <shape-box> | fill-box | stroke-box | view-box

where
<length-percentage> = <length> | <percentage>
<inset()> = inset( <length-percentage>{1,4} [ round <border-radius> ]? )
<circle()> = circle( [ <shape-radius> ]? [ at <position> ]? )
<ellipse()> = ellipse( [ <shape-radius>{2} ]? [ at <position> ]? )
<polygon()> = polygon( <fill-rule>? , [ <length-percentage> <length-percentage> ]# )
<shape-box> = <box> | margin-box

where
<shape-radius> = <length-percentage> | closest-side | farthest-side
<position> = [[ left | center | right | top | bottom | <length-percentage> ] | [ left | center | right | <length-percentage> ] [ top | center | bottom | <length-percentage> ] | [ center | [ left | right ] <length-percentage>? ] && [ center | [ top | bottom ] <length-percentage>? ]]
<fill-rule> = nonzero | evenodd
<box> = border-box | padding-box | content-box

Examples

The following example is excerpted from a sample that may be viewed live on GitHub in a supporting browser. The SVG in the second code sample is a simple drawing of a house with a chimney. The offset-path properties in the first code sample move a pair of scissors along the outside border of the house. Notice the :path() pseudo class in the offset-path property and the <path> element in the SVG. If you compare them, you'll find they are identical.

#firstScissorHalf {
  offset-path: path('M900,190  L993,245 V201  A11,11 0 0,1 1004,190  H1075  A11,11 0 0,1 1086,201  V300  L1294,423 H1216  A11,11 0 0,0 1205,434  V789  A11,11 0 0,1 1194,800  H606  A11,11 0 0,1 595,789  V434  A11,11 0 0,0 584,423  H506 L900,190');
}

#secondScissorHalf {
  offset-path: path('M900,190  L993,245 V201  A11,11 0 0,1 1004,190  H1075  A11,11 0 0,1 1086,201  V300  L1294,423 H1216  A11,11 0 0,0 1205,434  V789  A11,11 0 0,1 1194,800  H606  A11,11 0 0,1 595,789  V434  A11,11 0 0,0 584,423  H506 L900,190');
}
<svg xmlns="http://www.w3.org/2000/svg"
     width="700"
     height="450"
     viewBox="350 0 1400 900">
  <rect x="595"
        y="423"
        width="610"
        height="377"
        fill="blue" />
  <polygon points="506,423 900,190 1294,423"
           fill="yellow" />
  <polygon points="993,245 993,190 1086,190 1086,300"
           fill="red" />
  <path id="house" d="M900,190 L993,245 V201 A11,11 0 0,1 1004,190 H1075 A11,11 0 0,1 1086,201 V300 L1294,423 H1216 A11,11 0 0,0 1205,434 V789 A11,11 0 0,1 1194,800 H606 A11,11 0 0,1 595,789 V434 A11,11 0 0,0 584,423 H506 L900,190"
        fill="none"
        stroke="black"
        stroke-width="13"
        stroke-linejoin="round"
        stroke-linecap="round" />
  <path id="firstScissorHalf"
        d="M30,0 H-10 A10,10 0 0,0 -20,10 A20,20 0 1,1 -40,-10 H20 A10,10 0 0,1 30,0 M-40,20 A10,10 1 0,0 -40,0 A10,10 1 0,0 -40,20 M0,0"
        transform="translate(0,0)"
        fill="green"
        stroke="black"
        stroke-width="5"
        stroke-linejoin="round"
        stroke-linecap="round"
        fill-rule="evenodd" />
  <path id="secondScissorHalf"
        d="M30,0 H-10 A10,10 0 0,1 -20,-10 A20,20 0 1,0 -40,10 H20 A10,10 0 0,0 30,0 M-40,-20 A10,10 1 0,0 -40,0 A10,10 1 0,0 -40,-20 M0,0"
        transform="translate(0,0)"
        fill="forestgreen"
        stroke="black"
        stroke-width="5"
        stroke-linejoin="round"
        stroke-linecap="round"
        fill-rule="evenodd" />
</svg>

Specifications

Specification Status Comment
Motion Path Module Level 1
The definition of 'offset-path' in that specification.
Working Draft Initial definition

Browser compatibility

Feature Chrome Firefox (Gecko) Internet Explorer Opera Safari (WebKit)
Basic support 46.0 (as motion-path)
55.0 (as offset-path)
No support No support No support No support
Feature Android Android Webview Firefox Mobile (Gecko) Firefox OS IE Mobile Opera Mobile Safari Mobile Chrome for Android
Basic support No support 46.0 (as motion-path)
55.0 (as offset-path)
No support No support No support No support No support 46.0 (as motion-path)
55.0 (as offset-path)

© 2005–2017 Mozilla Developer Network and individual contributors.
Licensed under the Creative Commons Attribution-ShareAlike License v2.5 or later.
https://developer.mozilla.org/en-US/docs/Web/CSS/offset-path

在线笔记
App下载
App下载

扫描二维码

下载编程狮App

公众号
微信公众号

编程狮公众号

意见反馈
返回顶部