Chef Style Guide

Ruby is a simple programming language:

Chef uses Ruby as its reference language to define the patterns that are found in resources, recipes, and cookbooks
Use these patterns to configure, deploy, and manage nodes across the network

Ruby is also a powerful and complete programming language:

Use the Ruby programming language to make decisions about what should happen to specific resources and recipes
Extend Chef in any manner that your organization requires

Ruby Basics

This section covers the basics of Ruby.

Verify Syntax

Many people who are new to Ruby often find that it doesn’t take very long to get up to speed with the basics. For example, it’s useful to know how to check the syntax of a Ruby file, such as the contents of a cookbook named my_cookbook.rb:

$ ruby -c my_cookbook_file.rb

to return:

Syntax OK

Comments

Use a comment to explain code that exists in a cookbook or recipe. Anything after a # is a comment.

# This is a comment.

Local Variables

Assign a local variable:

x = 1

Math

Do some basic arithmetic:

1 + 2           # => 3
2 * 7           # => 14
5 / 2           # => 2   (because both arguments are whole numbers)
5 / 2.0         # => 2.5 (because one of the numbers had a decimal place)
1 + (2 * 3)     # => 7   (you can use parens to group expressions)

Strings

Work with strings:

'single quoted'   # => "single quoted"
"double quoted"   # => "double quoted"
'It\'s alive!'    # => "It's alive!" (the \ is an escape character)
'1 + 2 = 5'       # => "1 + 2 = 5" (numbers surrounded by quotes behave like strings)

Convert a string to uppercase or lowercase. For example, a hostname named “Foo”:

node['hostname'].downcase    # => "foo"
node['hostname'].upcase      # => "FOO"

Ruby in Strings

Embed Ruby in a string:

x = 'Bob'
"Hi, #{x}"      # => "Hi, Bob"
'Hello, #{x}'   # => "Hello, \#{x}" Notice that single quotes don't work with #{}

Escape Character

Use the backslash character (\) as an escape character when quotes must appear within strings. However, you do not need to escape single quotes inside double quotes. For example:

'It\'s alive!'                        # => "It's alive!"
"Won\'t you read Grant\'s book?"      # => "Won't you read Grant's book?"

Interpolation

When strings have quotes within quotes, use double quotes (" ") on the outer quotes, and then single quotes (' ') for the inner quotes. For example:

Chef::Log.info("Loaded from aws[#{aws['id']}]")

"node['mysql']['secretpath']"

"#{ENV['HOME']}/chef.txt"

antarctica_hint = hint?('antarctica')
if antarctica_hint['snow']
  "There are #{antarctica_hint['penguins']} penguins here."
else
  'There is no snow here, and penguins like snow.'
end

Truths

Work with basic truths:

true            # => true
false           # => false
nil             # => nil
0               # => true ( the only false values in Ruby are false
                #    and nil; in other words: if it exists in Ruby,
                #    even if it exists as zero, then it is true.)
1 == 1          # => true ( == tests for equality )
1 == true       # => false ( == tests for equality )

Untruths

Work with basic untruths (! means not!):

!true           # => false
!false          # => true
!nil            # => true
1 != 2          # => true (1 is not equal to 2)
1 != 1          # => false (1 is not not equal to itself)

Convert Truths

Convert something to either true or false (!! means not not!!):

!!true          # => true
!!false         # => false
!!nil           # => false (when pressed, nil is false)
!!0             # => true (zero is NOT false).

Arrays

Create lists using arrays:

x = ['a', 'b', 'c']   # => ["a", "b", "c"]
x[0]                  # => "a" (zero is the first index)
x.first               # => "a" (see?)
x.last                # => "c"
x + ['d']             # => ["a", "b", "c", "d"]
x                     # => ["a", "b", "c"] ( x is unchanged)
x = x + ['d']         # => ["a", "b", "c", "d"]
x                     # => ["a", "b", "c", "d"]

Whitespace Arrays

The %w syntax is a Ruby shortcut for creating an array without requiring quotes and commas around the elements.

For example:

if %w{debian ubuntu}.include?(node['platform'])
  # do debian/ubuntu things with the Ruby array %w{} shortcut
end

When %w syntax uses a variable, such as |foo|, double quoted strings should be used.

Right:

%w{openssl.cnf pkitool vars Rakefile}.each do |foo|
  template "/etc/openvpn/easy-rsa/#{foo}" do
    source "#{foo}.erb"
    ...
  end
end

Wrong:

%w{openssl.cnf pkitool vars Rakefile}.each do |foo|
  template '/etc/openvpn/easy-rsa/#{foo}' do
    source '#{foo}.erb'
    ...
  end
end

Example

WiX includes serveral tools – such as candle (preprocesses and compiles source files into object files), light (links and binds object files to an installer database), and heat (harvests files from various input formats). The following example uses a whitespace array and the InSpec file audit resource to verify if these three tools are present:

%w(
  candle.exe
  heat.exe
  light.exe
).each do |utility|
  describe file("C:/wix/#{utility}") do
    it { should be_file }
  end
end

Hash

A Hash is a list with keys and values. Sometimes they don’t have a set order:

h = {
  'first_name' => "Bob",
  'last_name'  => "Jones"
}

And sometimes they do. For example, first name then last name:

h.keys              # => ["first_name", "last_name"]
h['first_name']     # => "Bob"
h['last_name']      # => "Jones"
h['age'] = 23
h.keys              # => ["first_name", "age", "last_name"]
h.values            # => ["Jones", "Bob", 23]

Regular Expressions

Use Perl-style regular expressions:

'I believe'  =~ /I/                       # => 0 (matches at the first character)
'I believe'  =~ /lie/                     # => 4 (matches at the 5th character)
'I am human' =~ /bacon/                   # => nil (no match - bacon comes from pigs)
'I am human' !~ /bacon/                   # => true (correct, no bacon here)
/give me a ([0-9]+)/ =~ 'give me a 7'     # => 0 (matched)

Statements

Use conditions! For example, an if statement

if false
  # this won't happen
elsif nil
  # this won't either
else
  # code here will run though
end

or a case statement:

x = 'dog'
case x
when 'fish'
 # this won't happen
when 'dog', 'cat', 'monkey'
  # this will run
else
  # the else is an optional catch-all
end

if

An if statement can be used to specify part of a recipe to be used when certain conditions are met. else and elseif statements can be used to handle situations where either the initial condition is not met or when there are other possible conditions that can be met. Since this behavior is 100% Ruby, do this in a recipe the same way here as anywhere else.

For example, using an if statement with the platform node attribute:

if node['platform'] == 'ubuntu'
  # do ubuntu things
end

case

A case statement can be used to handle a situation where there are a lot of conditions. Use the when statement for each condition, as many as are required.

For example, using a case statement with the platform node attribute:

case node['platform']
when 'debian', 'ubuntu'
  # do debian/ubuntu things
when 'redhat', 'centos', 'fedora'
  # do redhat/centos/fedora things
end

For example, using a case statement with the platform_family node attribute:

case node['platform_family']
when 'debian'
  # do things on debian-ish platforms (debian, ubuntu, linuxmint)
when 'rhel'
  # do things on RHEL platforms (redhat, centos, scientific, etc)
end

Call a Method

Call a method on something with .method_name():

x = 'My String'
x.split(' ')            # => ["My", "String"]
x.split(' ').join(', ') # => "My, String"

Define a Method

Define a method (or a function, if you like):

def do_something_useless( first_argument, second_argument)
  puts "You gave me #{first_argument} and #{second_argument}"
end

do_something_useless( 'apple', 'banana')
# => "You gave me apple and banana"
do_something_useless 1, 2
# => "You gave me 1 and 2"
# see how the parens are optional if there's no confusion about what to do

Ruby Class

Use the Ruby File class in a recipe. Because Chef has the file resource, use File to use the Ruby File class. For example:

execute 'apt-get-update' do
  command 'apt-get update'
  ignore_failure true
  only_if { apt_installed? }
  not_if { File.exist?('/var/lib/apt/periodic/update-success-stamp') }
end

Include a Class

Use :include to include another Ruby class. For example:

::Chef::Recipe.send(:include, Opscode::OpenSSL::Password)

In non-Chef Ruby, the syntax is include (without the : prefix), but without the : prefix the chef-client will try to find a provider named include. Using the : prefix tells the chef-client to look for the specified class that follows.

Include a Parameter

The include? method can be used to ensure that a specific parameter is included before an action is taken. For example, using the include? method to find a specific parameter:

if ['debian', 'ubuntu'].include?(node['platform'])
  # do debian/ubuntu things
end

or:

if %w{rhel}.include?(node['platform_family'])
  # do RHEL things
end

Log Entries

Chef::Log extends Mixlib::Log and will print log entries to the default logger that is configured for the machine on which the chef-client is running. (To create a log entry that is built into the resource collection, use the log resource instead of Chef::Log.)

The following log levels are supported:

Log Level	Syntax
Debug	`Chef::Log.debug('string')`
Error	`Chef::Log.error('string')`
Fatal	`Chef::Log.fatal('string')`
Info	`Chef::Log.info('string')`
Warn	`Chef::Log.warn('string')`

Note

The parentheses are optional, e.g. Chef::Log.info 'string' may be used instead of Chef::Log.info('string').

The following examples show using Chef::Log entries in a recipe.

The following example shows a series of fatal Chef::Log entries:

unless node['splunk']['upgrade_enabled']
  Chef::Log.fatal('The chef-splunk::upgrade recipe was added to the node,')
  Chef::Log.fatal('but the attribute `node["splunk"]["upgrade_enabled"]` was not set.')
  Chef::Log.fatal('I am bailing here so this node does not upgrade.')
  raise
end

service 'splunk_stop' do
  service_name 'splunk'
  supports :status => true
  provider Chef::Provider::Service::Init
  action :stop
end

if node['splunk']['is_server']
  splunk_package = 'splunk'
  url_type = 'server'
else
  splunk_package = 'splunkforwarder'
  url_type = 'forwarder'
end

splunk_installer splunk_package do
  url node['splunk']['upgrade']["#{url_type}_url"]
end

if node['splunk']['accept_license']
  execute 'splunk-unattended-upgrade' do
    command "#{splunk_cmd} start --accept-license --answer-yes"
  end
else
  Chef::Log.fatal('You did not accept the license (set node["splunk"]["accept_license"] to true)')
  Chef::Log.fatal('Splunk is stopped and cannot be restarted until the license is accepted!')
  raise
end

The full recipe is the upgrade.rb recipe of the chef-splunk cookbook that is maintained by Chef.

The following example shows using multiple Chef::Log entry types:

...

begin
  aws = Chef::DataBagItem.load(:aws, :main)
  Chef::Log.info("Loaded AWS information from DataBagItem aws[#{aws['id']}]")
rescue
  Chef::Log.fatal("Could not find the 'main' item in the 'aws' data bag")
  raise
end

...

The full recipe is in the ebs_volume.rb recipe of the database cookbook that is maintained by Chef.

Patterns to Follow

This section covers best practices for cookbook and recipe authoring.

git Etiquette

Although not strictly a Chef style thing, please always ensure your user.name and user.email are set properly in your .gitconfig file.

user.name should be your given name (e.g., “Julian Dunn”)
user.email should be an actual, working e-mail address

This will prevent commit log entries similar to "guestuser <login@Bobs-Macbook-Pro.local>", which are unhelpful.

Use of Hyphens

Cookbook and custom resource names should contain only alphanumeric characters. A hyphen (-) is a valid character and may be used in cookbook and custom resource names, but it is discouraged. The chef-client will return an error if a hyphen is not converted to an underscore (_) when referencing from a recipe the name of a custom resource in which a hyphen is located.

Cookbook Naming

Use a short organizational prefix for application cookbooks that are part of your organization. For example, if your organization is named SecondMarket, use sm as a prefix: sm_postgresql or sm_httpd.

Cookbook Versioning

Use semantic versioning when numbering cookbooks.
Only upload stable cookbooks from master.
Only upload unstable cookbooks from the dev branch. Merge to master and bump the version when stable.
Always update CHANGELOG.md with any changes, with the JIRA ticket and a brief description.

Cookbook Patterns

Good cookbook examples:

Naming

Name things uniformly for their system and component. For example:

attributes: node['foo']['bar']
recipe: foo::bar
role: foo-bar
directories: foo/bar (if specific to component), foo (if not). For example: /var/log/foo/bar.

Name attributes after the recipe in which they are primarily used. e.g. node['postgresql']['server'].

Parameter Order

Follow this order for information in each resource declaration:

Source
Cookbook
Resource ownership
Permissions
Notifications
Action

For example:

template '/tmp/foobar.txt' do
  source 'foobar.txt.erb'
  owner  'someuser'
  group  'somegroup'
  mode   '0644'
  variables(
    :foo => 'bar'
  )
  notifies :reload, 'service[whatever]'
  action :create
end

File Modes

Always specify the file mode with a quoted 3-5 character string that defines the octal mode:

mode '755'

mode '0755'

mode 00755

Specify Resource Action?

A resource declaration does not require the action to be specified because the chef-client will apply the default action for a resource automatically if it’s not specified within the resource block. For example:

package 'monit'

will install the monit package because the :install action is the default action for the package resource.

However, if readability of code is desired, such as ensuring that a reader understands what the default action is for a custom resource or stating the action for a resource whose default may not be immediately obvious to the reader, specifying the default action is recommended:

ohai 'apache_modules' do
  action :reload
end

Symbols or Strings?

Prefer strings over symbols, because they’re easier to read and you don’t need to explain to non-Rubyists what a symbol is. Please retrofit old cookbooks as you come across them.

Right:

default['foo']['bar'] = 'baz'

Wrong:

default[:foo][:bar] = 'baz'

String Quoting

Use single-quoted strings in all situations where the string doesn’t need interpolation.

Whitespace Arrays

When %w syntax uses a variable, such as |foo|, double quoted strings should be used.

Right:

%w{openssl.cnf pkitool vars Rakefile}.each do |foo|
  template "/etc/openvpn/easy-rsa/#{foo}" do
    source "#{foo}.erb"
    ...
  end
end

Wrong:

%w{openssl.cnf pkitool vars Rakefile}.each do |foo|
  template '/etc/openvpn/easy-rsa/#{foo}' do
    source '#{foo}.erb'
    ...
  end
end

Shelling Out

Always use mixlib-shellout to shell out. Never use backticks, Process.spawn, popen4, or anything else!

The mixlib-shellout module provides a simplified interface to shelling out while still collecting both standard out and standard error and providing full control over environment, working directory, uid, gid, etc.

Starting with chef-client version 12.0 you can use the shell_out, shell_out! and shell_out_with_system_locale Recipe DSL methods to interface directly with mixlib-shellout.

Constructs to Avoid

Avoid the following patterns:

node.set / normal_attributes - Avoid using attributes at normal precedence since they are set directly on the node object itself, rather than implied (computed) at runtime.
node.set_unless - Can lead to weird behavior if the node object had something set. Avoid unless altogether necessary (one example where it’s necessary is in node['postgresql']['server']['password'])
if node.run_list.include?('foo') i.e. branching in recipes based on what’s in the node’s run-list. Better and more readable to use a feature flag and set its precedence appropriately.
node['foo']['bar'] i.e. setting normal attributes without specifying precedence. This is deprecated in Chef 11, so either use node.set['foo']['bar'] to replace its precedence in-place or choose the precedence to suit.

Recipes

A recipe should be clean and well-commented. For example:

###########
# variables
###########

connection_info = {
  host: '127.0.0.1',
  port: '3306',
  username: 'root',
  password: 'm3y3sqlr00t'
}

#################
# Mysql resources
#################

mysql_service 'default' do
  port '3306'
  initial_root_password 'm3y3sqlr00t'
  action [:create, :start]
end

mysql_database 'wordpress_demo' do
  connection connection_info
  action :create
end

mysql_database_user 'wordpress_user' do
  connection connection_info
  database_name 'wordpress_demo'
  password 'w0rdpr3ssdem0'
  privileges [:create, :delete, :select, :update, :insert]
  action :grant
end

##################
# Apache resources
##################

httpd_service 'default' do
  listen_ports %w(80)
  mpm 'prefork'
  action [:create, :start]
end

httpd_module 'php' do
  notifies :restart, 'httpd_service[default]'
  action :create
end

###############
# Php resources
###############

# php_runtime 'default' do
#   action :install
# end

package 'php-gd' do
  action :install
end

package 'php-mysql' do
  action :install
end

directory '/etc/php.d' do
  action :create
end

template '/etc/php.d/mysql.ini' do
  source 'mysql.ini.erb'
  action :create
end

httpd_config 'php' do
  source 'php.conf.erb'
  notifies :restart, 'httpd_service[default]'
  action :create
end

#####################
# wordpress resources
#####################

directory '/srv/wordpress_demo' do
  user 'apache'
  recursive true
  action :create
end

tar_extract 'https://wordpress.org/wordpress-4.1.tar.gz' do
  target_dir '/srv/wordpress_demo'
  tar_flags ['--strip-components 1']
  user 'apache'
  creates '/srv/wordpress_demo/index.php'
  action :extract
end

directory '/srv/wordpress_demo/wp-content' do
  user 'apache'
  action :create
end

httpd_config 'wordpress' do
  source 'wordpress.conf.erb'
  variables(
    servername: 'wordpress',
    server_aliases: %w(computers.biz www.computers.biz),
    document_root: '/srv/wordpress_demo'
    )
  notifies :restart, 'httpd_service[default]'
  action :create
end

template '/srv/wordpress_demo/wp-config.php' do
  source 'wp-config.php.erb'
  owner 'apache'
  variables(
    db_name: 'wordpress_demo',
    db_user: 'wordpress_user',
    db_password: 'w0rdpr3ssdem0',
    db_host: '127.0.0.1',
    db_prefix: 'wp_',
    db_charset: 'utf8',
    auth_key: 'You should probably use randomly',
    secure_auth_key: 'generated strings. These can be hard',
    logged_in_key: 'coded, pulled from encrypted databags,',
    nonce_key: 'or a ruby function that accessed an',
    auth_salt: 'arbitrary data source, such as a password',
    secure_auth_salt: 'vault. Node attributes could work',
    logged_in_salt: 'as well, but you take special care',
    nonce_salt: 'so they are not saved to your chef-server.',
    allow_multisite: 'false'
    )
  action :create
end

Patterns to Avoid

This section covers things that should be avoided when authoring cookbooks and recipes.

node.set

Use node.default (or maybe node.override) instead of node.set because node.set is an alias for node.normal. Normal data is persisted on the node object. Therefore, using node.set will persist data in the node object. If the code that uses node.set is later removed, if that data has already been set on the node, it will remain.

Normal and override attributes are cleared at the start of the chef-client run, and are then rebuilt as part of the run based on the code in the cookbooks and recipes at that time.

node.set (and node.normal) should only be used to do something like generate a password for a database on the first chef-client run, after which it’s remembered (instead of persisted). Even this case should be avoided, as using a data bag is the recommended way to store this type of data.

Use the Chef DK

This section covers best practices for cookbook and recipe authoring.

Foodcritic Linting

All cookbooks should pass Foodcritic rules before being uploaded.

$ foodcritic -f all your-cookbook

should return nothing.

More about Ruby

To learn more about Ruby, see the following:

© Chef Software, Inc.
Licensed under the Creative Commons Attribution 3.0 Unported License.
The Chef™ Mark and Chef Logo are either registered trademarks/service marks or trademarks/servicemarks of Chef, in the United States and other countries and are used with Chef Inc's permission.
We are not affiliated with, endorsed or sponsored by Chef Inc.
https://docs-archive.chef.io/release/11-18/ruby.html